我国化肥催化剂工业现状

全国48家化肥催化剂制造厂总能力为57Kt/a,产量近30kt/a,设备利用率不到50%。平均万吨氨耗催化剂10.36t,高于国外5.60t水平。现生产31个品种203个型号的催化剂中有103种经部级鉴定,但经常使用的约50种。目前化肥催化剂工业水平与国外相比还存在四方面差距。     

计算机单元模拟在三聚氰胺装置冷气风机分析上的应用

简述了三聚氰胺生产流程、冷气风机的作用和结构,介绍了冷气风机密封泄漏的计算机单元模拟过程,提出了以风机进出口温差作为判断其密封泄漏量大小的依据。     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

INTEGRATING ALBEMARLE RESOLVE DESULFURIZATION TECHNOLOGY WITH NOVEL PETRO-CANADA PROCESS CONCEPTS IN COMMERCIAL FCCU OPERATIONS

The gasoline and distillate sulfur regulations promulgated throughout the world to reduce tail-pipe emissions are now strongly impacting refinery operations and investments. FCC gasoline is recognized as the principal contributor of sulfur to the gasoline pool and has become the focus for meeting the new specifications. The difficulty in removing sterically hindered sulfur species in the fluid catalytic cracking unit (FCCU) cycle oil drives up the hydrogen and investment costs for treating the distillates. Although installation of pre- and post-treatment facilities is planned by many refiners, other non-capital approaches such as undercutting are being evaluated to meet interim and future sulfur levels. Even when expensive treatment facilities are installed, operating costs can be lowered and the flexibility of the facility increased with improvements in the ability to remove sulfur in the FCCU. In this article, we detail Petro-Canada's experience in integrating Albemarle's RESOLVE sulfur reduction technology with a combination of innovative process ideas. These concepts include heavy naphtha recycle, coprocessing of hydrogen donor feeds, and recycle of light cycle oil (LCO) to a specially designed stripper reactor. Special attention is paid to the interaction of deep FCC feed hydrodesulfurization with the FCC performance. The results demonstrate that very low FCC gasoline sulfur levels can be achieved without significant capital investment through novel approaches to recycle, creative integration of cat feed hydrotreating unit (CFHTU)-FCCU designs and operations, and application of state-of-the-art sulfur reduction additive technology. An added benefit of the RESOLVE 950 sulfur reduction technology is the substantial elimination of sulfur oxides in the FCC flue gas. This has been observed in Petro-Canada operations and numerous other RESOLVE 950 applications around the world.     

大颗粒尿素造粒装置技术改造

介绍了大颗粒尿素装置改造方案,对技术改造的实施效果进行了总结。从 技术改造和技术管理方面提出了相应的措施。     

系统控制单元数据存储更新算法探讨

系统控制单元的有限存储空间被系统运行数据写满时,新产生的数据就需替换旧数据完成更新。通过采用逐条替换法、分块替换法、间歇删除法和抢断删除法,比较替换过程中最少存储数据的数量和实时性的滞后时间,找出一种最优的数据更新方法。试验结果表明,抢断删除替换算法更能快速有效实时完成数据的更新。     

低密度泡沫玻璃的研究与应用

低密度泡沫玻璃是利用碎玻璃制造的一种气孔率大于90%的隔热保温材料,它具有强度高、导热系数小、吸水率低、不吸湿、耐腐蚀等特性,在潮湿环境下抗冻性能好,是一种优良的低温、超低温隔热保温材料。该产品用途广泛,所用的原材料简单易得,但生产工艺过程比较复杂,生产过程控制精度要求较高,容易产生各种缺陷而影响产品的质量。本文对低密度泡沫玻璃的生产工艺过程进行详细的分析研究,提出相应的措施,确保产品的低密度和高成品率,提高产品的性能,扩大产品的使用范围。     

影响超声波热量表流量测量单元静态时间差因素的探讨

超声波热量表主要包含流量测量单元和温度测量单元两部分,其中流量测量单元主要由传感器管道、反射片保持架、换能器等零部件组成。流量测量单元的静态时间差很大程度决定了热量表整体性能。我们通过大量的标定实验来验证各个要素对测量单元静态时间差的影响。     

用于高速旋转载体的惯性导航系统设计

针对高速旋转载体的实际应用情况,采用了无陀螺捷联惯性导航技术方案,快速精确测量载体的姿态、速度和位置信息。无陀螺捷联惯导系统采用加速度计来解算载体相对惯性系的角速度,从而代替角速度陀螺仪,提高了系统的高过载的适应能力。首先推导了一种基于六加速度计配置方式力学编排方程,分析了加速度计精度、杆臂长度以及时间等因素对角速度误差产生影响,最后仿真分析了加速度计精度对惯导系统的定位精度的影响,为系统设计提供理论依据。     

基于模糊PID算法的空调机组温度控制

针对中央空调系统空调机组温度控制的非线性、滞后性及时变性等特点,设计了基于模糊PID算法的空调机组温度控制系统,实现了空调机组温度的实时在线控制.该系统选用MCGS组态软件实现系统运行状态的监控,使用西门子S7-1200 PLC进行现场设备控制.运行结果表明模糊PID控制器设计合理,有效改善了空调过程的调节品质,提高了空调机组的温度控制质量.